Welcome To Australia's No.1 Media Center Community!
You Are Currently Viewing As A Guest - you'll need to register in order to participate in our community and make this annoying message disappear!
By registering you'll be able to post & reply to questions, set up your own image gallery & blog, communicate privately with other members, create & respond to polls, access downloads and other "members only" features.
Registration is fast, simple and absolutely free so why not join our community today - you'll be glad you did!
For any problems with the registration process or your account, please contact support.
I recently updated the firmware on DMA2100 to the latest release (116).
It was all working fine, faster menus etc.
I turned it off via the remote and went to bed.
The next day, I turned it back on via remote, the blue light came on, but nothing on the LCD. I hit the "Live TV" button on the remote to see if it was an LCD problem or something, but did not get any audio.
I have tried to connect to the LCD via component, I still dont get any picture.
I have held in the reset button for 20 seconds, still nothing.
I am connecting to a Samsung 32" LCD via HDMI.
The DMA2100 is connected via ethernet.
Anyone got any ideas?
Cheers
__________________
If my post has helped you, please hit the Thanks button :)
-------------------------------------------------------------------
Can you hook it up via composite (yellow plug)? Mine reset to composite once a while back & the only way I could get back in to change it was to plug it in via composite & go & change it back to the correct setting.
Justin
__________________
VMC32: Asus M3N78-EMH HDMI, 4850e, TMG A2 CPU Cooler, 2x1GB Kingston HyperX 800, 2 x HVR-2200 (4 tuners), 500GB Samsung, NSK2480B. Connected to a Metz 32 inch LCD.
Office/Server: Abit A-N78HD, BE-2350, 2x1GB Kingston HyperX 800, 2 x AverTV Duo (4 tuners), CoolerMaster Centurion 5 Tower.
I logged a tac case - they they told me to do a hardware reset:-
with unit turned on - hold in reset button for 10 seconds
then take power cable out while continuing to hold in reset for a further 10 seconds, then plug power back in while continuing to hold reset for another 10 seconds, then relesase reset and pull out power and re plug power back in.
after than the unit came up fine. It's IP hadn't changed, and it booted up straight into VMC.
Very wierd.................but happy it is all ok.
__________________
If my post has helped you, please hit the Thanks button :)
-------------------------------------------------------------------
I updated my firmware hopein it would sort the channel changing thing but after update I get a red light on the Dma thats it tried doing yer cool reset but doenst work!
Ive been emailin linksys for 2 weeks now havent got a reply except for the auto reply well get back ta ya in one day.
Im 2 lazy to ring but might have to!!!! Doh!
I shoulda bought a new 360 instead Ive got 2 allready, one is from when they first came out still going well except for noise! The other died but at least it was easy to log a call and get another sent to me!
I'm on my 2nd Linksys DMA2200. The first one was DOA.
In order to get the DOA DMA2200 swapped, the mob I bought it from online told me to contact Linksys Support and get a case number directly from them first.
I got put through to Linksys America but it was fairly quick and I did get my case number.
