DMA 2200 Learning Remote

[whitford]

Has anyone manage to make this happen. The instruction simply said:
Step 2
On the Extender remote press the button you wish to setup.

Step 3
On your other remote press the bu1tton you wish to learn.

Step 4
Press ? to exit the learning mode.

- I follow the steps, and it just doesn't work.
- Where is the "?" button anyway, can't find that.
- And there is "NO" step one?


Thanks....

[whitford]

Anyone has any ideas?

[coma]

Hi

I used these instructions from the user guide from the Linksys site.
-----------------------------------------
Remote Control Learning
The TV Power, Volume and Mute, buttons have no default
function. These can be programmed to learn the TV functions.
To program the learning feature of the remote control:

1. Place the Extender’s remote control head to head (approximately 2”-
3” apart) with the TV’s remote control.

2. On the Extender’s remote control, press the TV power button then
press and hold the DVD menu button and OK button. When you see
the green LED light up, release the buttons. The Extender remote is
now in learning mode.

3. Press the button for the feature you want to learn on the Extender’s
remote control for 5 seconds. The green LED will blink one time, this
means the Extender remote can learn this function. If you select a
function which can not be learned, the green LED will not blink.
Remote Control Learning

4. After the green light blinks one time, press and hold the corresponding
button on the TV’s remote control until the green LED of the
Extender’s remote control blinks twice to confirm the selection. If the
remote did not learn the command, the red LED blinks four times
quickly and terminates the learning procedure.

5. If you want to learn another key, repeat steps 3 and 4. Press DVD
MENU button to end learning mode.

6. If you do not press any button in 5 seconds, the learning setup mode
will end automatically.
---------------------------------------------
>> This worked fine for me
Coma.

[copytec]

Worked for me to