Well it seems that a lot of people seem to have a problems with dual DVICOs + nForce 2 boards. Especially Abit NF7-S's and esepecially when using SATA (all of which apply to me unfortunately). Seems the main problem is the handling of IRQs. Ive tried moving the 2 cards into different slots and some have better results than others but none come close to fixing the problem.
I did notice this on the DVICO support page though
http://www.fusionhdtv.co.kr/Eng/Supp...&pg=0&CATID=10
Orginally tried setting my processor to Advanced Configuration and Power Interface (ACPI) PC but it wouldnt boot. Second time round tried setting it to 'Standard PC'. This 'almost' worked. It showed TV fine but just had a slight stutter caused by writing to hard drive when recording one channel and watching another. It doesnt really matter anyway because I cant use 'Standard PC' because you dont get power management features with it such as auto power down, stand by, hibernate etc.
So still no sign of things improving. Looks like I picked one of the worst possible combinations of hardware
